The Aloha Nasal Pillows System is the next evolution in the design of the nasal pillow interface. Not only is this device extremely lightweight and quiet, but it offers an incredibly stable and comfortable seal. The unique ball-and-swivel joint, along with a hose swivel, adapts to the most active of sleepers all with minimal contact to the user's face. The Aloha features a unique and exclusive system that allows the end-user to adjust the angle and depth of the nasal pillows improving comfort and seal while minimizing potential discomfort.

Features and Benefits

Not only is the Aloha Nasal Pillow System extremely lightweight and quiet, but it offers an incredibly stable and comfortable seal
Ball-and-swivel joint minimizes torque and pull to accommodate various sleeping positions
Exclusive Arced-Track™ technology allows the angle of the pillow reservoir to be adjusted for a more customized and natural fit
CPAP hose can be routed over the head or worn down the chest
Wide-set headgear provides limited points of contact on the face and no interference with the eyes
Angled exhalation ports minimize potential disruption or discomfort for the user or bed partner
Minimalistic headgear made of soft, pliable, and breathable material

Other Related Products

Cleaning Instructions After Each Use

Remove the Headgear from the device by sliding each curved hook out of the Reservoir. The Headgear should be handwashed following the remaining instructions at least every 7 days. Do not machine wash.
Disassemble the Reservoir from the Tube Assembly by holding the Elbow and peeling away the Reservoir. NOTE: Do not pull on the tubing to remove the Reservoir or the circuit tube, as this may damage the tubing.
Handwash all components in warm, soapy water. NOTE: Only use pure soap and do not use alcohol, petroleum products, or strong cleaners as these may cause damage and reduce the life of the product.
Make sure that the exhalation ports on the Elbow are free of any obstructions.
Rinse thoroughly and shake excess water from interior surfaces of components. Allow all components to completely air-dry, away from direct sunlight.
Carefully inspect each component for any wear or damage. Discontinue use if you notice any cracks in the plastic, any tears or hardening of the silicone, or significant fraying or loss of elasticity of the headgear, and contact your healthcare provider for a replacement. Discoloration is normal after several washings and should not be considered sign of wear

Fitting the Device

Clean and thoroughly dry your face before putting on the interface.
Turn on your ventilation system and make sure it is functioning properly.
Attach the circuit tube of the ventilation system to the Swivel Coupling.
The angle of the Reservoir may be adjusted by changing its position on the hooks of the Headgear. It is best to start with the hooks engaged into the Reservoir channels as far as possible and then to rotatable adjust the hooks outward as needed. Note that the hooks have four position marks and take care that the hooks on both sides of the Headgear are let out equally. Note that If the fourth position mark is showing significantly outside of the channel, reinsert the hook as it is not properly assembled in the channel.

Buy from Medicinal Supplies and save!

Our price for DeVilbiss Aloha Nasal Pillows, Medium is one of the cheapest. Please don't forget to check out our other highly discounted respiratory health essentials and other medical products sold at our online store.